Labor protection gloves are fundamental protective equipment in industrial production. According to data from the Emergency Management Department in 2023, hand injuries account for 17% of total work-related accidents, and gloves that meet national standards can reduce accident risks by more than 50%.

        Technical Specifications for Protective Performance
        Based on GB 7544 standard:
        1. Mechanical Protection Requirements
        Cutting resistance levels 1-3 (Level 1 withstands a load of 2 Newtons)
        Abrasion test ≥ 2500 revolutions (EN 388 standard)
        2. Chemical Protection Indicators
        Water pressure resistance ≥ 30 minutes (ISO 13994)
        Oil penetration time ≥ 30 minutes (GB 12624)
        3. Thermal Protection Parameters
        Electric welding gloves resistant to 1200°C molten beads (EN 12477)
        High-temperature model working temperature limit value 250°C (ASTM F1060)

        Material Characteristics Application Guidelines
        Natural latex: elongation rate ≥ 800% (Quality inspection report)
        Nitrile material: oil resistance higher than basic products (chemical testing data)
        High-strength fiber: tensile strength ≥ 700MPa (GB 8965)

        Standard Maintenance Requirements
        1. Replacement Cycle Description
        Ordinary latex gloves are recommended to be replaced after 60 working hours
        Special fiber gloves are recommended not to exceed 80 working hours of use
        2. Special Industry Requirements
        Food processing gloves comply with GB 4806 standard
        Cleanroom certified by ISO 14644

        Inspection and Verification Process
        1. Check LA safety mark (certification number XK-XX-XXXX)
        2. Confirm the cutting protection level in the test report
        3. Check the seam tensile strength (national standard requires ≥ 50 Newtons)